£0.00View All
(0) Shopping Cart
US DollarEuroAustralian DollarNorwegian KronePound SterlingDanish KroneSwiss FrancSwedish Krona
Currency
News

Carpro Clearcut Rapid Cut Compound 500ml

« back
Home > Polishing
CarPro ClearCut 500ml - Fast Cut Compound is the result of several years working towards creating a fast and heavy cutting compound, it is considerably more aggressive than any compound previously produced by Carpro!  

The result is the go to compound for removing heavy defects, removing sanding marks as heavy as 1000 grit with ease.  CarPro ClearCut has been developed to quickly remove defects while easily allowing you to view the progress of your work through the polish while still on the panel.  After just 1 or 2 passes you can see the defects being removed as the polish becomes clear, at this point you can continue to polish if required or choose to move on to your finishing polish.  With some pads this incredible next-gen compound may also be used as a 1 step product not needing a finishing polish at all!

CarPro ClearCut is an extremely fast acting liquid abrasive built from the ground up for efficiency, performance, and speed!  Unlike other popular compounds on the market ClearCut doesn't fool you by swelling the paint or hiding water spots and scratches just to see them re-surface later!  With NO fillers ClearCut wipes off fully and a simple Eraser wipe down EASILY removes any lubricants. 

To get the best from Carpro Clearcut the method is not the traditional high to light pressure but the exact reverse, with Carpro Clearcut you start with lighter pressure and finish heavy!  While ClearCut cuts like a knife, it is low dusting and wipes off with ease!  

Features:

Next-Gen Compound
Cuts FAST!
Zero Fillers
Low dusting
Removes p1000 grit and up
Body shop safe
Suitable for both Dual Action and Rotary machines
Use with a variety of foam, microfiber, and wool pads

Specifications:
Size: 500ml
Color: White

Directions:

For Dual Action use:

Prime a clean dry pad with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
Spread product across section approx 2ft square
Raise speed to HIGH speed with LOW pressure 
Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
Increase pressure with each pass, finishing down with heavier pressure 
When scratches are gone or polish has been worked through, wipe clean with microfiber towel
Clean pads with a brush or air to remove excess polish
Move on to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.

For Rotary use:

Prime a clean dry pad with a very thin worked in layer of compound and add an additional 3-4 pea sized drops of product
Spread product across section keeping polisher on low speed with LOW pressure 
Use MINIMAL pressure for first 2-3 passes increasing pressure with each pass
Increase pressure with each pass, finishing down again with low pressure 
When defects are removed or polish has been worked through, wipe clean with microfiber towel
Clean pad with brush or air line to remove excess polish
Move to next section -> Apply 6 - 8 pea size drops to pad and repeat steps 2-7.
 
Tips:

We recommend following with CarPro Reflect or Essence.
Wash pads thoroughly after use with warm soapy water and leave out to dry before storing.

 

NOW: £24.95
In Stock
Carpro Clearcut Rapid Cut Compound 500ml

Customer Reviews
Write an online review and share your thoughts with other shoppers!