DLUX Long Life Trim Coat was engineered specifically for coating plastics as well as rubber and metal. It can be used on any wheel finish including clear coated, chrome, aluminum, and plastic.
This coating is the pinnacle of Exterior Plastic protection and darkens the trim as well without leaving any slick greasy feel that washes off.
•Made from quality high grade organic silane. DLUX is a Silane-based glass coating, DLUX Contains more than 50% pure silica!
•Restores faded trim to look like new.
•Lays down a protective film which forms an extremely durable glass coating on top of any substrate it is applied to.
•Dlux offers a semi permanent chemical bonding to surface pores
•Very easy to apply with great UV protection, on all exterior substrates.
•Can be used on textured or smooth plastic
•DLUX also offers semi permanent protection of aluminium wheels & Plastic finished wheels.
•On wheels, DLUX will repel dirt and dust with ease & aid in the removal of brake dust.
•DLUX will leave a glossy finish and is entirely hydrophobic.
•Durability: 9-12 months
•Average use for 4 wheels and plastic trim = 10-15ml.
•Make sure the surface is cool and dry. (Do not apply to hot surfaces or in direct sun.)
•Scrub surface with an all purpose cleaner and or water spot remover, rinse clean, and allow to dry.
•Use ERASER to remove any residue left by the APC or oil film and wait until the cleaned area is completely dry.
•Wet the applicator with 5-6 drops of DLUX and spread evenly across the surface.
•Let cure 1 minute at 85 degrees F up to 10 minutes at 50 degrees F
•On textured plastic simply apply even and your finished
•On other surfaces like smooth plastic, or non porous surfaces use a clean auto detailing cloth or suede MF to wipe it off gently, in a circle motion until no marks left.
•Allow the surface to cure for 1-3 hours without any moisture on its surface.
•Completely cured with NO rain requires 24 hours. (Any water marks from rain must be wiped off during first 24Hrs as a precaution)