Carpro Cquartz Lite Edition 150ml kit
£0.00View All
(0) Shopping Cart
US DollarEuroAustralian DollarNorwegian KronePound SterlingDanish KroneSwiss FrancSwedish Krona
Currency
News

Carpro Cquartz Lite Edition 150ml kit

« back
Home > Glazes & Sealants
CQuartz Lite is an easily applied ceramic coating based on the incredible CQuartz UK Ceramic Coating Technology, which has become famous around the world.  

CQuartz Lite can be applied as a stand-alone ceramic coating lasting more than 6 months or it can be used as a topcoat for existing CQuartz coatings.

CQuartz Lite was designed for those that aren’t ready to make the plunge into the industry leading strength of our professional strength coatings but wish to enjoy some of the many benefits that only CQuartz coatings offer.  CQuartz Lite bridges the gap between the less effective traditional sealant technology and CQuartz Ceramic coatings that so many have come to love.

The capabilities of CQuartz Lite include: easier to clean surfaces, resistance to insect splatter, petrol spills, light solvents, Acids, Alkali in a PH 3-12 range and harmful UV rays, whilst providing a beading contact angle of 110 Deg!  In other words, CQuartz Lite helps keep your paint super glossy, well protected, beads like crazy, and washes easy when properly maintained!

CQuartz Lite can be use on any exterior surface of your car including paintwork, plastics, wheels and glass (except windscreen), like your other favorite CQuartz products, CQuartz Lite is also matte safe!

Kit contents

150ml CQ Lite
2 x mf hand applicators
1 x Carpro ultra short loop microfibre cloth
1 x 3M face mask

Directions: 

 1) Make sure the surface is clean and fully decontaminated. Use CarPro Iron X, Tar X, and clay the surface to ensure all contamination is removed.

2) Use Carpro Eraser (or similar) to remove oils before application. Make sure surface is cool and dry. You may wish to polish the surface with Essence or Reflect to create higher gloss before using Eraser or to ensure maximum durability.

 3) Apply 10-12 drops on a microfiber applicator; apply the product evenly to one small area of roughly 24x24” / 60cm x 60cm with complete coverage and an even layer,

4) Use a high quality microfiber to remove any excess. CQuartz Lite does not need to be left to cure on the surface so should be removed immediately. Check well with an appropriate light source to ensure you remove any high spots or residues.
Note: for a limited time after application, high spots that were not removed immediately can be corrected by applying more CQuartz Lite on that area and wiping off immediately.

 5) After paint is free of residue, leave to dry for 4 hours prior to getting wet. Any water drops during first 48h should be removed before drying to prevent water spotting. We also recommend the use of Carpro Reload 1 hour after application to protect from water spots during first 48h

NOW: £39.95
In Stock
Carpro Cquartz Lite Edition 150ml kit

Customer Reviews
Write an online review and share your thoughts with other shoppers!