Collinite BEADCOAT Ceramic Sealant 473ml & Collinite SLICKR Ceramic Detailer 473 - FREE 4 Cloths

Collinite Beadcoat is an easy to use sealant featuring an SiO2 graphene structure. It provides ultra-durable hydrophobic protection and a high gloss, super slick finish to a variety of automotive exterior surfaces.

Featuring a functional ceramic-graphene resin structure, this easy-to-use formula provides 6 months of stand-alone paint protection and UV/detergent-resistant shine. Beadcoat can also be used to enhance & preserve an existing ceramic or graphene coating. Safe for paint, glass, wheels & trim.

Directions:

Always test product first in a small, inconspicuous area to ensure desired result.

For optimal bond/protection, ensure surface is free of above-surface contamination; this can be achieved with iron remover and clay process (towel or bar). Below-surface paint imperfections (swirls/ scratches/marring) should be removed by DA Polish (e.g. Collinite’s No. 390)

As a lubricating drying aid: Following a wash, while vehicle surface is still wet, apply 2 sprays of Beadcoat to one 3x3 ft panel at a time. Using a microfibre towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass). *This process is only recommended if a previous base coat of Beadcoat has been applied.

Please note: Not for use on contaminated surfaces; untreated by iron (chemical) or clay (mechanical) processes, interior surfaces, tyres, or hot surfaces. Do not apply over a wax or sealant.

Features:

• 6 months of stand-alone paint protection
• Extreme hydrophobic beading effect
• Applied over ceramic coatings, paint protection film
• For paint, glass, wheels, exterior trim
• Easy wipe on-wipe off high gloss shine
• Drying aid (once a base layer is applied)
• UV and detergent resistant
• Average Spread/Coverage: 600-1,000 sq ft

Size 473ml (16oz)

Collinite Slickr 3 in 1 Ceramic Detailer quickly & easily adds hydrophobic water beading properties and a high gloss, hyper-slick finish to a variety of exterior automotive surfaces.

With an SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to be used as a drying aid, topper, clay lubricant or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.

Directions:

Always test product first in a small, inconspicuous area to ensure desired result.

As a lubricating drying aid: Following a wash, while vehicle surface is still wet, apply 2 sprays of Slickr to one 3x3 ft panel at a time. Using a microfibre towel, wipe entirety of panel until dry. Flip towel as necessary and change towels as they become saturated. Repeat process on all painted surfaces (and glass).

As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberised side). With minimal pressure, move decon towel over a 3x3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface in order to maintain slickness/lubrication and to avoid marring. Remove product from panel with a dry microfibre towel. Repeat process on all painted surfaces (and glass).

Features:

• Extremely slick finish
• Removes light dust, fingerprints and smudges
• Up to 3 months hydrophobics
• Easy wipe on wipe off high gloss shine
• Use on paint, glass, wheels and trim
• Can be used as clay lubricant, drying aid, show car prep
• Topper over waxes, sealants, ceramic coatings, paint protection film
• Average Spread/Coverage: 600-1,000 sq ft

Size: 473ml (16oz)