Description
Collinite Slickr 3 in 1 Ceramic Detailer quickly & easily adds hydrophobic water beading properties and a high gloss, hyper-slick finish to a variety of exterior automotive surfaces.
With an SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to be used as a drying aid, topper, clay lubricant or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.
Directions:
Always test product first in a small, inconspicuous area to ensure desired result.
As a lubricating drying aid: Following a wash, while vehicle surface is still wet, apply 2 sprays of Slickr to one 3x3 ft panel at a time. Using a microfibre towel, wipe entirety of panel until dry. Flip towel as necessary and change towels as they become saturated. Repeat process on all painted surfaces (and glass).
As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberised side). With minimal pressure, move decon towel over a 3x3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface in order to maintain slickness/lubrication and to avoid marring. Remove product from panel with a dry microfibre towel. Repeat process on all painted surfaces (and glass).
Features:
- Extremely slick finish
- Removes light dust, fingerprints and smudges
- Up to 3 months hydrophobics
- Easy wipe on wipe off high gloss shine
- Use on paint, glass, wheels and trim
- Can be used as clay lubricant, drying aid, show car prep
- Topper over waxes, sealants, ceramic coatings, paint protection film
- Average Spread/Coverage: 600-1,000 sq ft
Size: 473ml (16oz)
